Kanthal case solution

Kanthal has about 10, customers and they produce about 15, items. Kanthal is company that specializes in the production and sales of electrical resistance heating elements. The company consists of three divisions and these three divisions are as follows:

Kanthal case solution

Soldering methods with standard solder do work reliabaly long term but take extra effort to implement. Solders tailored for this type of application make soldering easier. Acid fluxes tailored for difficult materials are available. These are totally unsuited to PCB level soldering but are acceptable for wire termination such as this as long as instructions are properly followed.

Kanthal Case Study Analysis - Case Solution, Analysis & Case Study Help

This requirement is not unique to acid flux - anything can cause problems if instructions are not properly followed. Crimp methods are common and work "well enough" in many cases.

Crimps on even standard wiring in demanding environments can be extremely unreliable longer term if not carried out correctly.

Kanthal case solution

In this case "correctly" may be specified by a manufacturer for Nichrome use with a given connector but, if not, then enthusiastic "works well for me" advice which is not based on long representative experience or manufacturers advice may led to longer term disasters.

Be careful with crimping: Crimp connection is a widely used solution for wiring termination and in many cases works well. In demanding situations it can often produce poor reliability. I at one stage did some work looking at fault sources for people who had a reasonably large number of electronic systems installed in a number of taxi fleets.

A wide range of installers who were considered to be competent had done installations over some years using standard crimping tools and standard wire and cable types. In installations where there were problems a significant proportion had connection issues which could be remedied by rebuilding crimped joints.

Which crimped joint was the bad one in any given case added to the fun. Soldering joints which had been crimped cured such connection problems and solder joints were not a significant trouble cause. The above was with copper wires, not Nichrome. Nichrome can be expected to be more difficult to manage well.

I've used scrape, wrap, solder as in second method below, with good-enough success. Clamping mechanically is often used.

The advice below actually sounds like it may work. The magic may be in the silver and the flux. So, other solders may work.

Kanthal case solution

Note that Duzall is extremely corrosive and will happily eat anything electronic that comes in contact with it. This method sounds potentially workable but careful cleaning after tinning is essential. Discussion group recommendation of Dynagrip kit from All-State They say: Dynagrip kit from All-State includes 4' of silver bearing solder and a small dropper bottle of Duzall liquid flux Another company that makes a small kit is J W Harris out of Mason, Ohio They even make kits to solder aluminum.

These kits can be purchased at nearly any welding supply store. They also work good for soldering the ends on SS motorcycle cables.Kanthal Case Executive Summary Over the years Kanthal has used its traditional accounting management system to cost its products.

In , when Carl-Erik Ridderstrale became president he developed the Kanthal 90 plan to increase overall profitability.

Hello, If u want us to solve any case study from below list, do contact us anytime, We are here to provide the experience, expertise, and professionalism that you are looking for, Our tutors are available 24/7 to assist you what you need, Click Here to submit your Order.

===== A Letter from Prison [ ]. Kanthal is a successful and profitable company that is a worldwide market leader in many of the products that it produces. Nevertheless, its new president feels that the company needs a new strategy that will provide it with a way to further increase profits but without increasing costs.

Kanthal Case Executive Summary Over the years Kanthal has used its traditional accounting management system to cost its products.

In , when Carl-Erik Ridderstrale became president he developed the Kanthal 90 plan to increase overall profitability. James Haapala University of Michigan - Ann Arbor.

Kanthal (A)

Last Updated At Sat Apr 26 GMT+ (UTC). Kanthal Case: Ø 30/70 rule: 1. What you need to do is look at the value chain and figure out where both of you can come up with an integrative solution. 1. Examine the Supplier Value Chain à Firm.

Kanthal (A) Case Solution And Analysis, HBR Case Study Solution & Analysis of Harvard Case Studies